What are the Biggest Tires you can run on 4Runner (Stock, Lift Kit, and Leveling Kit) – Largest Tire Size on 4Runner Explained
We have had a few questions on the biggest tires you can fit on your 4Runner. Asking this question on a forum might get you a few snarky comments, but it is welcomed over here. We got this question again and figured we should probably write something about it.
If you are asking yourself what the largest tire you can fit on your stock 4Runner is, you will find it here. If you want to know what the largest tire size you can fit with a lift or leveling kit is, we are also going to be covering this.
This should serve as your complete guide to the 4Runners tire size (for most people anyway). If you have any questions about tire size on your stock, leveled, or lifted 4Runner, you are in a safe place. There are no forum trolls on this page waiting to bark at you for asking one of the most common questions in off-road history.
4Runner Tire Size Guide
Common Questions
I had these questions at one point as well:
- How big can I go?
- Do I want to go as large as possible?
- What are the benefits of going bigger?
- What are the downsides of going bigger?
- At what point do I need a BMC (Body Mount Chop)
- Should I keep my stock wheels?
- What is the best wheel size for Off-Road use?
- What are the best All-Terrain tires?
The most common questions about Tire Size:
- Largest Size Tires on Stock 4Runner?
- Largest Size Tires with Leveling Kit?
- Largest Size Tires with Lift Kit?
17″ Wheel/Tire Options (Examples for Rubbing Vs. Non-Rubbing)
- 265/70/17 (31.61″ – Stock 4Runner Size) (7-9″ Space Needed) – Won’t Rub
- 255/75/17 (32.06″ – 6.5-8.5″ Space Needed) – Won’t Rub
- 275/70/17 (32.16″ – 7-8.5″ Space Needed) – Won’t Rub
- 285/70/17 (32.71″ – 7.5-9″ Space Needed) – Questionable (BMC Might be Needed)
- 305/65/17 (32.61″ – 8.5-11″ Space Needed) – Will Rub – Adjustments/Mods Needed
- 255/80/17 (33.06″ – 6.5-8.5″ Space Needed) – Will Rub – Adjustments/Mods Needed
- 305/70/17 (33.81″ – 8-9.5″ Space Needed) – Will Rub – Adjustments/Mods Needed
- 285/75/17 (33.83″ – 7.5-9.5″ Space Needed) – Will Rub – Adjustments/Mods Needed
- 35X12.5R17 (34.76″) – Yes, you guessed it – Adjustments/Mods Needed
18″ Wheel/Tire Options (Examples for Rubbing Vs. Non-Rubbing)
- 265/65/18 (31.56″ – Close to Stock) (7.5-9.5″ Space Needed) – Won’t Rub
- 275/65/18 (32.07″ – 7.5-9.5″ Space Needed) – Won’t Rub
- 285/65/18 (32.59″ – 8-10″ Space Needed) – Questionable (BMC Might be Needed)
- 295/65/18 (33.10″ – 8-10″ Space Needed) – Will Rub – Adjustments/Mods Needed
20″ Wheel/Tire Options (Examples for Rubbing Vs. Non-Rubbing)
- 245/60/20 (31.57″ – Stock) (7-8.5″ Space Needed) – Won’t Rub
- 275/55/20 (31.91″ – 7.5-9.5″ Space Needed) – Won’t Rub
- 285/50/20 (32.22″ – 8-10″ Space Needed) – Questionable (BMC Might be Needed)
- 285/55/20 (32.34″ – 8-10″ Space Needed) – Questionable (BMC Might be Needed)
- 275/65/20 (32.99″ – 7.5-9.5″ Space Needed) – Will Rub – Adjustments/Mods Needed
Resources and Guides:
- 33″ tires: Fender liner push back
- 34″ tires: Fitting larger tires guide
- 35″ tires: Fitting 35×12.5R17s
- Trimming body and fender liners
- Body Mount Chop (BMC)
- Fiberglass fenders installation
The best resource out there for checking tire sizes and exact diameter measurements is the TireSize.com calculator. You can use this website to check your tire size diameter, height, and width to make sure the tire will clear your mud flaps, body mounts, fender liners, body plastics, firewalls, and pinch welds/seems.
You should always consult with these websites before you go larger on tires. One of the most important aspects of buying new wheels is the correct width and offset as well as backspacing.
If you don’t do your research on Width, Offset, and Backspacing, you will learn how to do a body mount chop or a body mount relocation and trim multiple areas of your wheel well. But this is also not a bad thing, either.
Body mount chops are nothing to be afraid of. Once the edge of the body mount is cut off, you paint over a new piece of metal and it looks factory again. When and if you go to sell your 4Runner, it’s likely no one will notice.
How to Check Tire Size and Wheel Size Fitment
Recommended Wheel & Tire Size for the 4Runner
Option 1: ToyoTires.com
If you are looking to figure out if a wheel fits a tire size, head over to ToyoTires.com.
They have a really good “recommended” wheel size for whatever tire size you enter. Go to ToyoTires.com and enter in your tire size. From there, Toyo will give a list of their tires. Select a tire that you have or are considering and then you will see a section labeled “APPROVED RIM WIDTH RANGE (IN.)”. This will give you a range of wheel sizes that are compatible with the tire size you enter.
From there, you see what wheel sizes will fit that tire. If you do not see your wheel size there, that doesn’t mean it won’t fit. It just means that it is not “recommended”. What does this mean? Maybe the tire company will not warranty the tire if some type of defect occurs. In any case, call your local tire shop for details on this one.
Option 2: TireSize.com
If you have any questions about the recommended wheel size for a certain tire size, what I usually do is visit the Tire Size website and search for the tire size. From there, it will tell you what the recommended wheel size is for that tire size.
Go to TireSize.com > Search your size > Find the “Generally they are approved to be mounted on “X” wide wheels.
- Example: 235/80/17
- https://tiresize.com/tiresizes/235-80R17.htm
- Recommended wheel size: Generally 235/80/17 are approved to be mounted on 6-7.5″ wide wheels.
- TRD Off-Road Wheels: 7.5″ width.
- 235/80/17 will work with the TRD Off-Road Wheels.
When Choosing Wheels (Look at these specs):
Our wheel specs:
- Bolt Pattern: 5th Gen = 6×139.7mm or 6×5.5
- Wheel Bore: 5th Gen = 106mm
- Offset (-offset pushes the wheel out giving you a wider stance. +offset pulls wheel into the wheel well)
- Backspace (Similar to offset – the space between center tire and inside wheel)
- Rating (Weight rating wheels were designed for)
- Weight (lb)
- Lug Type (tapered “conical” and radiused)
- LipSize (in)
Here is a good guide on offset and backspace to help you understand the differences.
Note: When shopping for a wheel, I look for a wheel with at least a -6mm offset or higher. Maybe a -10mm or even higher offset. This is going to push your wheel out of your wheel well which may eliminate the need for wheel spacers, but not always, all while providing a wider stance.
An extreme example of offset is the -38mm SCS (Stealth Custom Series) F5. That is going to push your wheel out of the well 1.5″ which is a lot. Most wheels are going to come in a 0mm, -6mm (.2″) or -10mm (.4″) offset. If you buy a wheel at this offset and are looking for a very wide stance, you want to add a set of wheel spacers to widen your stance even more.
Stock wheel size on our 5th Gen
- The SR5 comes stock with 17 x 7, 4.5″ backspace.
- The TEP (Trail), the TRD Pro, and the TRD Off-Road come with 17 x 7.5″ and a 4.875″ backspace.
- The Limited Edition comes with 20 x 7 with a 4.5″-inch backspace.
Largest Tire Size on 5th Gen 4Runner?
Stock 4Runner?
The short answer is 32″. Our stock 4Runner has a 31″ tire (265/70R17 – 31.61″). Making the jump to a small 32″ tire should be fine on stock suspension. You want to make sure this is a smaller 32″ tire and not a larger 32″ tire. Some 32″ tires measure closer to 33″ tires.
For example, a 32.06 is basically a 32″ tire, while a 32.79 is closer to a 33″ tire. If you get a 32″ tire that is closer to 33″, you may end up doing a BMC and other modifications like a fender liner push back to ensure your tires will not rub without a leveling kit. If you want a larger tire, you should really look into a leveling kit or lift kit, though.
Most owners make the jump to a 33″ tire (285/70R17 – 32.71″). Moving up to a 33″ tire requires a leveling kit or a lift kit. If you have 3″ of lift in the front, then moving to a 33″ tire should be fine, but there are 33″ tires that will rub even with 3″ of lift. It may seem confusing but every tire is different due to the tread pattern, and general design.
With 33″ tires and 3″ of lift, you may have some rubbing on the fender liners – which is a really easy fix that no one will notice. If you are trying to avoid trimming fender liners, BMC and other areas of the well, stay away from 34″ tires or large 33″ tires as this will absolutely cause serious rubbing all the way around. 34″ tires (285/75R17 – 33.8″) will rub on the front fender liners, and body as well as the body mounts and possibly even the firewall.
Largest Tire Size with Leveling Kit?
The largest tire size you can run with a leveling kit is entirely up to you. With a 2″ leveling kit, you may still be stuck at a small 32″ without any modifications like a BMC.
If you move up to a small 33″ (32.7″) tire with a 2″ leveling kit, you will likely need to do a fender liner push back.
Small 33″ tires are probably as big as you want to go with a 2″ leveling kit unless you want to get into more adjustments than just your fender liners. Which, at the end of the day these adjustments are not hard, they just require some testing and consistent adjusting until you no longer have rubbing.
Largest Tire Size with Lift Kit?
Most owners that have a lift kit are still at the same level of a leveling kit, but possibly up 1″. The basic suspension lift kit for a 4Runner is 3″ – 3.5″. 33″ tires are usually fine without any major modifications here, but it also depends on the exact measurements of your 33″ tires and the terrain. If you Mud Terrains with large tread blocks and lugs, you may be closer to rubbing as opposed to mild All-Terrain tires.
Small 33″ (285/70R17 – 32.71″) tires should clear fine with 3″ lift kit but if you get into 33.5″ tires or 33.7″ tires, you will need to do some adjustments for sure.
With 33″ tires, you still always run the risk of a BMC, fender liner mods and actually trimming off parts of your body. Just keep in mind, that if you go with 33″ and up, you will have a higher probability of adjustments to make.
At 34″ tires with a 3″ Icon suspension lift, we had to do numerous modifications (fender liner, body, pinch welds, rocker panel caps, etc.).
Wheel Spacers & Offset (same concept)
When you add wheel spacers, this may cause more rubbing than before. After we installed our Icon stage 2 suspension and added Spidertrax wheel spacers, we had more rubbing on the fender liners and body.
With the 2″ (50.8mm) spacers (for example), you are pushing your wheel and tire out of the well 2″.
Without spacers or little to no offset, your tires are sitting in the center of the wheel well, for example. In this position, they have plenty of room to turn inward without rubbing because your fender liners are curved inward. But, once that wheel comes out of the wheel, that outside edge of the inward curve (body and fender liners) then becomes a collision course for your tire thus causing the rubbing.
So keep in mind, the more negative (-) offset your wheels have, the more likely you are to rub on the fender liners and body plastics.
Common examples with a 3″ of kit:
- 275/70R17s (32.16″): Rubbing unlikely
- 285/70R17s (32.71″): Mild rubbing, fender liners and plastics, BMC likely, body trimming optional, rocker caps questionable.
- 285/75R17s (33.8″): Prepare to trim and chop mostly everything.
With 33.8″ (34″) tires, we had to chop our body mounts, push back our fender liners, slice big sections off of our fender liners, slice sections off our rocker panel caps, new lines in our 4Runner’s body, smashed in the pinch welds, and removed the mud flaps.
It was a lot of work to get things to work and constant testing but the off-road result with 34″ tires was well worth it. Once you get your 34″ tires to comfortably fit inside your wheel well, wow. The results are amazing. Just make sure you have an adjustable suspension (Icons, KINGS, FOX, Radflo) or any others so you have more flexibility in your adjustments.
Do I want to go as large as possible?
Not always. Going with the biggest tire you can mean that you need to cut your body mounts, trim your fender liners and cut into your 4Runner’s body. If that is something you are interested in doing, then, by all means, go all out. If we could have gone larger than 34″ tires, we would have. We likely will in the future.
Benefits of going big?
Having bigger tires allows you to clear more obstacles off-road. With larger tires on your 4Runner, you have more grip on all types of terrain. There is a huge difference between 33″ tires and 34″ tires and 35″ tires when you are off-road. I have had 31″ tires, 33″ tires and 34″ tires and with 34″ tires, everything is easier. It also depends on the driver and how much experience you have. Also airing down your tires has a big impact on what you can do and what your tires can grip.
Downsides of going big?
Gas mileage and trimming 4Runner liners and plastics. When you make the jump to 33″ and 34″ tires, you will see a decline in gas mileage. Even if you regear (change the gearing ratio), you will still see a slight decrease in gas mileage with larger tires.
The good happy-medium tire size is probably 32″ – 33″. With 33″ (285/70R17) tires, you can still trek just about anywhere you want off-road while still maintaining some decent MPGs.
A larger tire has a greater circumference. So the wheel turns fewer revolutions to go the same distance as a smaller tire.
How does that affect RPMs?
So you’ll be increasing tire size by 10%, so you’ll decrease engine speed by 10% too. Assuming you’re running about 3000 rpm at 70 mph with the small tires, you’ll drop 10% with the big tires. 10% of 3000 is 300, so you’ll go down to 2700 rpm. Jalopyjournal.com
Re-Gearing?
Re-gearing your 4Runner is not cheap. The cost of Nitro Gears is about $1200. Depending on where you take your 4Runner, you can spend $1000-$1500 in labor. And while you have IFS apart, you might as well add a front locker. An ARB front locker is $1000. All out the door, re-gearing and locking the front diff can run you around $3500.
With 33″ tires, re-gearing is debatable. Very few guys do it. With 34″ tires, gearing is highly recommended, and most shops will recommend a gear ratio of 4.56. If you are moving to 35″ tires, you can go with 4.88s or even 5.29s. This completely subjective though and many guys will argue this point back and forth.
Just know re-gearing can get expensive but is highly worth it if you decide to go with larger tires.
BMC (Body Mount Chop)
- True North BMC Kit: Check Price
This all depends on what lift kit or leveling kit you have. In most common cases, you will want to go with 33″ tires. With 33″ tires, you need a 3″ lift in order to avoid a BMC, but not always. Once you go to 33″ tires, you will likely need to chop the body mounts.
If you only have a 2″ leveling kit with 33″ tires, you will need to do a BMC for sure.
With 34″ tires and 3″ of lift, you will need to do a BMC, trim your fender liners, push back your fender liners and cut into your 4Runner’s body.
Aftermarket UCAs (Upper Control Arms) are also recommended to get an increased caster spec (to push your wheel/tire away from the body mounts) but not always needed. For this, you want to contact a good off-road alignment shop in your area. We live in Sacramento, CA so we go to Stellar Built. They do the off-road alignment (yes it’s different), installs, and much more.
Should I keep my stock Wheels?
Always a good option. There is nothing wrong with keeping your stock wheels and making the jump to bigger tires. The stock 17″ wheels are great for on-road and off-road use. Moving to an aftermarket wheel is only more expensive and oftentimes, more confusing.
If you are a first-time owner and not sure about aftermarket wheels, just grab a new set of larger tires and go experience what your 4Runner has to offer.
What is the best Wheel Size for Off-Road Use?
Typically, the smaller the wheel size, the better your off-road performance will be, but not always. When it comes to our world, 17″ wheels are probably your go-to size. You want to stay away from 20″ wheels on your 4Runner if you plan on frequent off-road trips.
When it comes to smaller wheel size, you can air down the tire pressure further than you can with a 20″ wheel. Having less air pressure in your tires means your tire will have more flotation and grip the terrain much easier than at full PSI where the ride is stiffer.
With less air pressure, the ride will be smoother and less bumpy, all while gripping the terrain much more efficiently.
Good All-Terrain Tires?
The section of copy came from another post we wrote on Mods (Part 1). All these tires are based on a 285/70R17 (about 32.71″ depending on tread). Always check prices online Vs. your local tire shop. If online is cheaper, just have them shipped to your tire shop.
For the best AT tire or MT tire, Cooper offers some pretty great options for just about every driver. Of course, the BFG KO2 is a popular brand but Cooper has quickly become one of the go-to brands in the Toyota SUV/Truck market.
Check out our complete guide to buying tires – An article created from 20+ different drivers.
Most popular options linked below.
$100-$200/ per tire
- Yokohama Geolandar
- General Grabber
- Firestone Destination
- Nitto Terra Grapplers
- Toyo Open Country
- Cooper Discoverer AT3 4
- Cooper Discoverer AT3 XLT
- Cooper Discoverer S/T MAXX
- Falken Wildpeak
$200-$500/ per tire
- Cooper Discoverer STT Pro
- BF Goodrich KO2
- Toyo Open Country AT 2
- Toyo Open Country MT 2
- Cooper Evolution MT
- Cooper Discoverer MTP
- Goodyear Duratrac
- Nitto Trail Grapplers
- Goodyear Wrangler Duratrac
- Mickey Thompson Baja Boss A/T
If you guys have any questions – let us know.
If you see a question asked that has not been answered – feel free to answer it.
[…] Mods 2 – Tire Size Guide […]
[…] Mods 2 – Tire Size Guide […]
[…] Mods 2 – Tire Size Guide […]
[…] Mods 2 – Tire Size Guide […]
What next size tire from stock size can I use without a problem 2019 4Runner trd pro want a taller tire
Where will a 255/80/r17 tire rub? I currently have 285/70/r17 (TRD Off-Road wheels), but they do not allow me to run tire chains. I am switching to a skinnier tire to provide space between the tire and the spindle. I would prefer not to go to a 255/75; I previously ran a 275/70 and would like a taller tire.
Tire Clearance Related modifications: ARB Summit front bull bar (mildly increased wheel well clearance and pushed fender liners back), SPC upper control arms, Camburg LCA (Camburg required spacers on the steering rack, so my turning radius has been reduced, but it equals less rub), no mud flaps, cut the extra thread on the bolts at the top of the wheel well (after they removed 360 degrees of tread on my tire! – occurred during full compression at high speed), and probably more things. My rear tires will never rub. I have a coastal off road bumper, Dobinson long travel, all adjustable links and track bar, etc.
Strut Top Shim: I am also installing a 1/4″ strut shim to assist with tire clearance (a lift does not help with tire clearance as a compressed coil over is always the same length)
I would greatly appreciate any insights you have.
There is definitely misinformation within this post, and it is very misleading.
I have 255/80/17 on mine with stock wheels and no suspension modifications (besides a 0.5″ strut spacer), and I do not rub at all, even under full compression and full steering lock.
Check out the Tinkerer’s Adventure YouTube video titled “4 Tips to ACTUALLY Fit Tires on Toyota IFS | 33s No BMC“. You’ll learn that wheel offset and high caster UCAs usually cause the problems, and that no amount of lift will help you fit bigger tires while still maintaining full suspension travel.
What size tires are on the stock height grey one?
I just traded my wrangler for a 21 trd offroad so I am trying to learn as much about yota as I do a about jeeps
Body Mount Cutting.
Hello thank you for all the information, I have 2021 4Runner TRD pro I need to know the biggest tires I can get with out a lifting. Thanks Zenobia.
255 80 17 (33.1’tire)
Thank you for all of that great information.
Much appreciated.
Tengo una 4runner 2003 5RS,QUIERO poner rines 16 x 10 off set negative, soy nuevo en esto y para poner estás llantas que más del piñon,que mas se debe agregar al presupuesto o que modificación se debe aplicar..saludos
Will 265/60/20 tires fit on the limited wheels with a 1″ leveling kit?
I have a stock limited 4Runner. What sthe biggest tire size I can fit without lift or body mods?
265/R17
Hey I have a 2017 limited with 2″ levling kit up front, and 3″ spacer lift in the back, we went with KMC zero offset rims, and Toyo AT III LT 275/70/17, and had to do the fender liner push back mainly for the front right driver side tire as it was rubbing on reverse driver side turns only, but since I had the generator and the heat gun out I did the passenger side as well , even though that side was not rubbing, so just to let everyone know that sometimes even if it says it does not rub, you may have slight rubbing, depending on your 4runner, we are happy with the way It looks now, the 20″ do not have enough rubber in my opinion. Cheers!!!
Just a quick note, actual experience my wife drives a 18 LE 4×4, I installed Icon Vector 6, 17×8.5 wheels, 139.10 hub, 4.75 back space and 0mm offset running a set of Falken 265/70R17 these rub at full lock in reverse and right & left turns going forward the tire hits the front fender liner. Keep in mind this is a limited stock height no lift no spacers. I bought 5 wheels and tires and the spare fits but hangs down (meaning it can be seen) not something I really care about. Just so you get real world knowledge all specs and brands of tires have been given. So in short it does not seem to be the wheel it has to be the tire not all tires are created equal even though the sizes are the same.
Very true, I have these on American Outlaw -10 offset wheels with Bilstein 5100 on the front set to 1.75” and a 1” Bilstein spring in the rear. They rub in reverse when cranked. Less rubbing after the Bilstein install, they used to rub pulling in to a parking space even with the Bilsteins at 0.85”.
Hi there, I just purchased a OME 3inch lift kit for my 2015 sr5 4Runner, can I run 285/70/17 without any rubbing or body modifications?
Pro Comp Level kit 3” on a 2017 TRD-OR can this fit 285/70/17 KO2s!?
I think it will be good. I have a TRD pro with 1.5 lift in front (so 2.5 over other trims) 285/70’s fit with no rubbing without any wheel spacers
I have a 2017 Barcelona red trd pro w/ an arb ome bp51 lift. I’m trying to get suggestions for a wheel tire combo. 33×12.5 is what I want
This is a great article, my only complaint is that whenever it mentions 33″ tires, it only lists wider versions. My question is what mods will be needed to use a BFG KM2 tire in 255/80R17 on a stock 5th Gen 4Runner? I ask because I had tall, narrow tires on my 17 Taco (255/85R16’s), and removing the front mud flaps was the only thing necessary to remove all rubbing, at any turning or backing. I’m wondering if that will be all that I need to do to use 255/80R17’s on my new 4Runner. Please give more love to those of us who like skinny tires.
hello? guys, can i do a 275(60-65)r18 on a 2022 sr5 4runner? will i need a lift kit?
Bought 4Runner with mods of 3” lift and 295/55/R20 tires and the vehicle pulls hard to right and sometimes left very unpredictable which way and when it pulls. Suggestions?
Hello, just curious in knowing…
at which point do the stock upper control arms require change-out regarding larger suspension and tires?
I am considering moving to 285’s but not if I have to upgrade the stock UCA’s.
I have 3” lift of front plus a 1” lift in the rear…
thanks!
Has anyone tried running 285/70/17 on 2021 4Runner trd off road prem. If so will it need BMC? What kind?
I have a 2017 pro with a 1.5in front and 1.25in rear from Wescott Designs, running 285/70s no BMC or fender liner adjustments (until I put wheel spacer and then both are needed).
Buying a 4runner soon and wanting to upgrade the tires early after purchase so I can get good resale on the stocks. If I put a 2 inch lift kit on it, can anyone recommend a good tire that will fit without any rubbing issues or further modifications?
Considering going to a 245/75R17 in a Falken or KO2. It’s fundamentally the same size as OEM at 31.5″. Going with TRD Pro wheels. I can see no issue with fitment, right? right??
aesthetically i prefer skinny tires and believe in them for noise, economy, and grip in snow/rain.
Wanted to confirm first if i will run into any issues.
You definitely won’t run into any fitment issues. As long as the 245’s are rated to fit safely on 7.5″ wide TRD wheels you should be good to go.
TRD PRO wheels are only 7in wide. TRD OFF ROAD wheels are 7.5 in wide.
2021 SR5Prem.
I have a 1inch front level. No mud flaps. Wanting to buy 275/70/17 AT tires..I know the articles says “no rub” but I also heard opposite. Is anyone running this wheel size set up? Any rub full wheel lock? Rub on cab? Thanks!
Thanks for the article. I have no lift and put BFG KO 275/70/17s on my 2022 4runner with Method wheels 0 offset and 4.5″ backspacing. They barely rub at full steering lockout on the back of the front fender well plastic liner that is molded with the mudguard. The plastic is thermoformed with a bump-out where it rubs. When I pushed on the bump-out there was space between the body mount arm and the plastic. I was able to heat the plastic with a heat gun and massage it flat. That solved the problem. It required no cutting so I retained the protection of the mudguard. A 285 would probably touch the body mount arms located behind the mud flap and need to be trimmed as shown in the article.
How’s the noise w the 275s. I want to do the same thing w this trd sport
Greetings, just purchased a 2021 Limited and looking to change tires and wheels to something more aggressive looking. .I don’t necessarily want to go taller but instead wider, and I am going to lift the front 2.5 “. Your tire size chart specific to rubbing or not doesn’t address offset or backspacing specific to the tire size listed, can I assume you are working with factory wheel specs? I believe my Limited is +15 offset., It has 245/60/20’s but my plan is to go to a 17” wheel, and maybe with a +4 offset like the TRD wheels if necessary.
I guess my question is that if I stay with a wheel that has +15 or +4 offset, and stay with a tire around 31.5 tall, any idea how wide of a wheel and tire can I get by with and not have any rub?
Chris – I have a 2015 SR5 and installed a 2/1 leveling kit. I mounted 17×8, 0 offset, +4.5 backspacing FN f(x) Pro wheels with Toyo Open Country AT III’s in stock size 265/70/17. At full lock in reverse I have very slight rubbing. Hope this helps.
Hi, does anyone have 275/60/20 tires in their 2021 4Runner? what has been your experience? Does it rub? or has potential to rub? The site above recommends 275/55/20. Thanks.
I have a 20 venture addition with the trd 17in wheels. Im looking to put 275/70R17 falken wildpeak at3 on it. Suspension is stock the overall diameter is of the tire is 32.4. Will I be needing to do a bmc since it’s right in the middle? I’m already planning on doing the trim and pushback.
Don’t have personal experience with the Limited’s but here is a good reference point:
Many Limited owners put on the exact wheel/tire setup from the Pro’s (17×7, +4 offset, and 265/70R17) with no issues.
Another good reference point would be an article posted on here a while ago where the owner fit FN FX Pro wheels (17×8, 0 offset) and 275/70R17 tires with some minor plastic liner work on his Limited. Here’s the article on that: https://trail4runner.com/2017/09/28/5th-gen-4runner-limited-fender-mod/
Dear Davin—-Thank You—-this is precisely the info I was looking for—-Steve
Hello, I have a 2019 4Runner TRD off road. I use it for commuting, and my off-roading is limited to my barn, the beach, & the crappy streets in my city. It currently has P265/70R17 on it. I had a 3/1.5 lift/level kit put on and would like to run a larger all terrain tire that won’t rub or require any modifications. Recommendations?
Thanks!
Carrie,
I have a 2016 SR5 Prem with 285/70/17 Falkin Wildpeak M/T’s with no rubbing at all. I also have an Eibach Stage 2 Lift with SPC upper control arms.