Repairing Rock Rash and Curb Rash On Offroad Wheels – How To Guide

Repairing Rock Rash and Curb Rash on Wheels - Complete Guide

Repairing Trail Rash On Offroad Wheels – A Complete Step by Step Guide Including Tools, Materials and Everything You Need

Whether you picked up a brand new, or “new to you” set of SCS wheels – congrats!

We all know how elusive they can be to obtain. The following write-up will apply to anyone who has the Ray10, BR6 or SR8 wheels with the black outer lip, and wants to repair some mild trail rash. In my particular case, I picked up a decently used set of Ray10s in matte gunmetal grey from a friend. This project will likely be a multi-day one, allowing at least one day for paint & prep, and at least a full day for drying before the finishing touches.

Here are the following supplies used in this project:

  1. Power drill (optional)
  2. 10mm socket
  3. Palm sander
  4. 120, 220, 320 and 600 grit sand paper
  5. Tack cloths
  6. X2 cans of spray paint
  7. Spray paint can trigger (optional)
  8. Painter’s tape
  9. Plastic bags or paper for masking
  10. 0000 Steel wool (optional)
  11. Carnauba wax (optional)

Step 1. Prep & Clean Wheels

First thing’s first, we need to get eighty (!) faux-bead lock bolts off the wheels. These use a size 10mm socket, and I would highly recommend using either a power or impact drill to save your arms from the manual labor of using a ratchet socket. As an optional step, I also soaked all of the bolts in some dish soap just to loosen up any of the caked in dirt from their previous life.

Once all of the bolts are out, I thoroughly cleaned the wheels to help see how much cosmetic damage these wheels really had. In the pictures above, you’ll see that they had some mild trail rash from things like tree stumps, but nothing major from boulders or the like.

Step 2. Repairing Trail Rash

This next part is the scary part, be sure to wear safety glasses and a mask as there will be micro specks of paint and metal coming off the wheels. I would recommend doing this out in the garage or some other area that is protected from the elements but not in your direct living quarters. Using a palm sander and 220-grit sandpaper to start, gently start to etch away at the outer ring of the wheels. This won’t take much pressure and you’ll see the semi-gloss factory finish turn into a dull grey – try to maintain even pressure and keep your palm sander flat.

Once you have sanded down the semi-gloss coat, you can either continue to use 220-grit or move to a more aggressive 120-grit to start knocking away the more noticeable dings and scrapes. Once those have been sanded away to your satisfaction, take the 220-grit and use a sweeping motion to even it out with the rest of the wheel lip. If you have more severe trail rash that can’t be taken out with sanding, you may want to consider using some metal-reinforced bondo to fill in the gauges and sand over once dry.

Step 3. New Paint

After all the sanding has been done, use some tack cloths and a shop vac to clean up the sanding debris from the wheel surfaces to prep for paint. Once all of the paint surfaces are clean, I used some painter’s masking tape and plastic grocery bags to mask off the main part of the wheel that I did not want to get the spray paint on.

As you start painting, you’ll want to do light, even coats in a sweeping motion, slowly working your way around the wheel. I used a satin black paint + primer from Krylon and went through about 2 cans to give each wheel around 5 coats. I found that using a spray paint can trigger worked wonders in keeping the coats even and controlled. After finishing the paint, make sure the wheels have a place to dry that is preferably climate controlled as too cold will result in pro-longed dry times and too warm or humid will result in paint cracking.

Pro-Tip: Pay VERY close attention to the specific additional coat/dry times of the paint you choose. I did not, and this led me to messing up the paint finish which resulted in me having to re-do this entire process again! Against my better judgement, here are a few pics of shame from my mistake.

Step 4. Finishing Steps

Once all your wheels have been painted and allowed ample time to dry, I found it useful to make a make-shift Lazy Susan to ensure I could smooth out the paint as evenly as possible. At this point, you’ll no longer want to use an electric palm sander and just do this step manually. With some 320-grit sand paper and mild soapy water for lubrication, run it along the flat portion of the lip as evenly as possible, then slowly move to the inner and outer edges. Repeat this process until there are high spots in the paint, then again a few more times with the 600 grit sand paper. This should leave your paint finish feeling pretty smooth.

This next step is optional, but since I went through all of this work, I wanted to make my wheels a little more unique and wanted to give them a brushed metal-like finish. To do this, I just repeated the final sanding steps, but with 0000 steel wool (sounds scarier than it is) until the desired effect.

As a final (and another optional) finishing step to help protect this fresh coat of paint, I applied a generous amount of carnauba wax and buffed it in for some UV protection.

Final Thoughts

My friend also tracked down some black plastic bolts (seller unfortunately no longer exists) to replace the metal chrome ones – this was an unplanned part of the wheel restoration project, but I think it actually worked out better for my whole “unique” goal.

Repairing Rock Rash and Curb Rash on Wheels - Complete Guide

Overall, I learned a lot from this project – could I have done a little better job? Sure. However, I’m still very pleased with the outcome, despite some of the sanding imperfections that are still visible. Now that these wheels have a fresh start on my rig, what are your thoughts? Leave any future trail rash alone, as a badge of honor, or touch them up every now and then to restore some of their original glory?

Thanks for taking the time to read, and I hope to see your SCS wheels out in the wild!

Subscribe
Notify of
guest

2 Comments
Inline Feedbacks
View all comments
VinceD.
VinceD.
2 years ago

Thanks for the write up and step by step! Def gonna try this!

2
0
Questions or Comments?x
()
x