4Runner Recovery Gear Setup Example – Off-Road & Overland Recovery Gear Essentials

4Runner Recovery Gear Setup

Snatch Straps, Winch Rigging Accessories, Hi-lift Jack Accessories, Recovery Boards, Shackles, and other Commonly Used Recovery Gear

Recovery Gear is off-road insurance as far as I’m concerned. You don’t need it all, you may never use it all, but when you need some extra help, these tools can get you out of a bad place.

Right up front, I want to let you know that I have bought all this stuff on my own and none of this gear was received as free stuff to test or review. I’ve used several sources to buy them – mostly Amazon, but there are plenty of online vendors out there. I have been particularly happy with AutoAnything and OK4WD for good pricing, a wide selection of merchandise, and great customer service. I have no connection to any of these retailers, but I did want to share a good customer experience I’ve had with them all. Your experience may vary.

In this article, I’ll go over the off-road tools and accessories I have and describe how and where I’ve used them. I’ll also share how I haul them around. I don’t have them in my 4Runner all the time and take different gear depending on where I’m going. Truth be told, even though I have them all for a while, some of this gear has never seen active duty.

Snatch Gear

Recovery Snatch Gear

Detailed Product List

What I do carry in the truck every day is a set of snatch straps and tow straps (yes there is a difference), hard and soft shackles, and a hitch-mounted recovery point. This gear helps when recovering or towing another vehicle. It’s fairly easy to accumulate without breaking the bank. The basic setup requires good recovery points to connect to both vehicles. I have an SSO Slimline Hybrid Front bumper with recovery points on both sides and I use the hitch mount recovery point in the back. If you want a second hitch mount in the back, you can grab something like the Factor 55 Hitchlink.

Adding hitch mounted recovery point

With the addition of a hitch receiver, you will also need a hitch pin and clip and preferably a bow shackle or a soft shackle if you plan on recoveries. There are many versions of the hitch pin set-up. You can get hitch pins with standard clips, locking clips, or locking heads.

Alternatively, you can use just the hitch pin as a recovery point, although this is more or less a “last resort” method and as a best practice, you should be using a recovery point connected to the frame of the vehicle. For a hitch pin recovery, if that’s all you have, slide your snatch strap into the receiver, then slide the pin through one end of your strap and then secure the pin with the clip on the other side. This is a great option if you are looking to add a recovery point for under $10.

It’s important to know where suitable recovery points are so I usually let the other owner tell me where to attach to on their vehicle. However, I will verify the points and only attach after I’m confident they will work.

One other point to keep in mind is the load rating for the snatch gear. Most will have their specific load rating on a tag or in the product literature. You can see in the photo on one strap I wrote down the load rating since they didn’t provide it on the strap itself. I always buy from known sources and will typically buy a product with a higher load rating (2-3x or more the weight of the truck). I found that the price difference between a slightly higher load rating is not significant.

Winch Gear

Warn Winch Gear Setup

Detailed Product List

The most expensive single piece of recovery gear I have is the Warn Winch with a synthetic line and 10,000-pound capacity. At the end of the day, I’ve seen various articles on what size winch to buy and the general recommendation is 150%+ of the weight of the vehicle. That should be enough pulling power to get out of deep mud.

Winch Line

There is also a lot of articles comparing synthetic and steel winch lines. The synthetic line is more expensive but it’s much lighter than steel, will not store potential energy under load and snap like a rubber band if it breaks. It is much easier to work with than steel since it won’t develop sharp burs that can do some real damage to your hands. Steel is much more resistant to abrasion, more durable, and not affected by ultraviolet light. All things you need to consider when using a synthetic line.

Winch Shackle

At the end of the winch line, I’ve attached a Factor 55 product (The Splicer XTV) that acts as a shackle with a closed-loop or “Closed System Winching” instead of the supplied hook from Warn. The theory behind this product is that it’s safer than a hook (no gap to slip through, solid construction with a higher breaking strength) and provides full cover for the winch line protecting it from UV light.

Using a Winch

There are 2 ways to use a winch. The Vehicle with the winch can be stationary and pull another vehicle or other items that need to be moved (vehicle assisted recovery), or the winch line can be attached to a stationary object (self-assisted recovery) to pull the vehicle itself. If the winch vehicle is stationary pulling another vehicle, you will need to use bow shackles or soft shackles and consider only load rated frame-mounted recovery points as described above. The winch line takes the place of snatch straps. Do not use snatch straps for winching.

If the winch vehicle needs pulling you will need to attach to a stationary object. If that’s another vehicle, you will again need to use shackles as noted above. You can also attach to a tree, a large rock or to the ground itself with different gear:

Tree Saver Straps

To attach to a tree, it’s best to use a tree saver. The one I have (shown in the picture) is a 3inch wide, 8-foot-long blue strap that goes around the tree. Using the winch line can damage the tree or the line itself. I prefer to use a soft shackle to link the tree saver to the winch line but any shackle will work. Just make sure you understand how to attach a hard shackle to a soft strap before winching.

Using rocks or the ground as a winch point

If there are no trees close enough, you can attach to a large rock or the ground itself using a Deadman Land Anchor (Deadmanoffroad.com). If you have not seen this, there are plenty of YouTube videos to show you how it works. It’s basically a heavy canvas tarp with a thick protective coating and heavy straps that you can bury in dirt, sand, or snow to act as a lightweight ground anchor. You can also use it as a tree saver and it’s big enough to wrap around a large rock. I haven’t used it yet, but the online videos are convincing and it’s a very universal recovery tool.

Snatch Blocks

Snatch blocks are large pulleys that can be attached to a line. Many companies such as ARB and WARN make snatch block and now Factor 55 has a new product (RRP – Rope Retention Pulley) that is lighter, and technically stronger than its counterparts. Traditional snatch blocks are split so you can attach them to the middle of the winch line without running the entire cable through it. The RRP is similar in theory however it has rubber points that hold the line in place. Snatch blocks act as a pulley to double the winching load capacity by doubling the length of the pull itself. With enough snatch blocks (3 or more) you can even winch your vehicle backwards. There are many videos out there on winching backwards that can help explain how the process works.

Winch Damper

A Warn Winch Damper is a mandatory piece of gear when using steel cable and highly recommend for a synthetic line as well. The damper (any heavy rubber mat, coat, coat, or blanket) is placed on the steel line in case it snaps. The damper would help hold down the line close to the ground and minimize the effect of the snapped steel cable acting as a whip. There is much less risk when using a synthetic rope, but a damper can come in handy to act as a knee pad or a line marker to keep others from crossing your winch line.

Hi-lift Jack and Accessories

Hi-lift Jack and Accessories:

Detailed Product List

The prime use of a Hi-Lift jack is to lift your vehicle when a regular jack just won’t work. With a proper base (Hi-Lift Jack ORB Off-Road Base), a hi-lift jack can be used on loose sand, hard rock, dirt, or your driveway. There are also many ways to attach the jack to your vehicle.

With the right accessories, you can lift using your bumper, rock rails (sliders) ( Hi-Lift Jack BL-250 Bumper Lift) or your wheels ( Hi-Lift Jack LM-100 Lift-Mate).

You will need to determine if your bumper, side rails, or rock sliders can support the weight of your vehicle as well. Take care not to damage parts when you have metal on metal or metal on sub-frame or metal on plastic trim parts.

Although you can change a tire with a Hi-Lift jack, I have found it much more useful to get a rock or anything else under a tire to get out of a hole or get more traction. If you feel like you need to change a tire and that tire is stuck in the mud/snow, first get unstuck – then change your tire.

I have also used the Hi-Lift jack as a pretty effective winch. Before I had a winch, my son and I got stuck in a mud hole but were able to use the jack with chains to pull the 4Runner out. It took hours to get out but without the jack, we would have needed to find a tow in the middle of no-where.

A photo above with the Hi-Lift and accessories includes a Hi-Lift Jack HK-R Red Handle Keeper and Jackmate. These accessories help prevent your Hi-Lift from wobbling around and making lots of noise on the road and on the trail. You can and should also get a jack cover from somewhere like Step 22 (previously jackcovers.com) so that you can protect the integrity of your Hi-Lift Jack.

Maxtrax, TREDS  & Recovery Boards

Maxtrax, Treds, ramps and other recovery boards

Detailed Product List

  • MAXTRAX Boards (4) – Check Price
  • MAXTRAX Mounts – Depends on your preferred mounting method
  • MAXTRAX Telltale Leashes

Recovery boards are very popular as an easy way to add traction on many different surfaces. They are effective on sand, snow, loose dirt and can be used as bridges over rocks and small gaps. They are very easy to use – just get them as close to and as far under your tires as you can (they can be used as a shovel) to let them grab onto the ground and your tires.

They come in sets of 2 and in most cases that’s all you need to get out of a jam. With 2 sets or 4 boards, you can get out of just about anything, however they are not the answer to all recovery situations. In more severe cases, you should be prepared with a winch along with a proper load rater winch rigging setup.

There are a couple of ways to set up recovery boards: in parallel and in series. In other words with 2 or 4 boards, you can line them up one under each wheel – in parallel – or line them up in a row so that 2 or more boards cover more ground in a straight line serially.

I have seen them used to bridge small gaps but be aware not all boards are created with the same strength and some have cracked over a gap. Two or more layered would be the best way to bridge a small gap. One more use for them is at camp to level a vehicle or trailer. Just stack them to the desired height.

The downside to the boards is that they take up a lot of space and you shouldn’t store them in your 4Runner especially after going through some mud, snow or sand. They will retain dirt until they are washed off with enough water pressure behind a hose. I use a set Maxtrax Recovery Board Mounting Pins attached to a crossbar on my roof rack to secure them to the top of my 4Runner. You can also use a set of TREDs or choose from many other options on Amazon. It all depends on your personal preference, but you should carry one of the two major brands. These cheapo recovery boards are often demolished the first time being used on the trail, and in some cases, might not even get the job done.

Shovels, Axe, Trimmers, and Choppers

Shovels, axe, branch trimmer and don’t forget your gloves

Detailed Product List

There is some extra gear I have to help in specific situations. I sometimes carry a Krazy Beaver shovel because it just looks good and does the job. It picks up the dirt and can cut through roots. However, I always have a smaller folding shovel in the truck because it can work in a pinch and it takes up very little space. Shovels are one of those recovery gear essentials I would recommend for any off-roaded or overlander. Brenan has a great guide on off-road shovels. You are sure to find one that suits your travel needs best.

An axe and some sort of branch trimmer or saw can help in thick brush. The Fiskars Saw in the photo above was an excellent find at Home Depot – very sharp and has been durable so far. Even carrying the Fiskers clippers can be a great addition if you are worried about pinstripes.

Daily Driving Gear

Extra Recovery Essentials

Detailed Product List

  • Jumper Cables – Check Price
  • Heavy Duty Gloves
  • Flashlight
  • Small Compressor

Gloves are a must-have and I have an extra pair for anyone willing to help. I also include a flashlight, jumper cables, and a small compressor even though I have onboard air.

There are many different options for jumper cables out there, I would recommend something is a 0 gauge if you can afford it. The larger gauge jumper cables are usually going to be much more dependable when you need them most.

Having an extra compressor is nice just in case someone in your pack doesn’t have one or forgets one, or you need portable air.

Storage – Where to put it all?

Recovery Gear Bags

I use 2 bags to hold most of the gear that I’ve discussed above. They hold most of the gear not directly attached to the truck or stored in a drawer. See photo above.

I’ve separated the tools into 2 bags with all the Hi-Lift accessories in one bag and the rest in the other. I had two large tool bags heavy enough to hold the gear already, so I didn’t have to buy anything for that. Another reason to use two bags was weight: a large part of the gear is made of heavy metal and all that gear was just too heavy to store, never mind carry in one bag.

Overland/Recovery Gear Bags

When loading them in the back of the 4Runner, you should take care in tying them down properly. Remember this gear is very heavy. Flying parts can be a problem.

In the back of the 4Runner, I have installed a drawer system with one draw used to keep some of the recovery gear I always take along. I have ratchet straps, tie-downs, and a siphon ready to go on each trip.

Recovery Drawers

Recovery Drawer

Includes gas siphon and ratchet straps.

The hi-lift jack was a struggle in terms of trying to figure out how to store it. I could have attached it to the roof rack but with a rooftop tent and the Maxtraxs, there is not a lot of room up there. I was also concerned with keeping the jack mechanism free from dirt which is why I recommend a jack cover.

I have seen reports that claim when left outside on a vehicle without some cover the lifting mechanism can fail. I was lucky to have a perfect spot on top of my drawers in the back of the 4Runner. The Hi-Lift fits across with accessories installed. I use a couple of wingnuts to secure the jack.

Jack Mount

Jack Mount

Shovel Mount

Shovel Mount

Last but not least was where to mount the shovel. Unlike the hi-lift Jack, I didn’t want to store the shovel in the truck. I’m not happy with the current set up but it works. I use a couple of Quick Fist fasteners to attach the shovel to the guard on my bumper. I will have to find a better place at some point but that’s where it sits right now but only when I think I need it.

Subscribe
Notify of
guest

10 Comments
Inline Feedbacks
View all comments
Robert Seberger
Robert Seberger
2 years ago

best to 4×4 on XBOX

David
David
3 years ago

Also important to note – you should always carry spare parts. My current spare parts list in my LT 4Runner.

-1 gallon antifreeze
-1 quart dot 3 brake fluid
-1 quart 5w30 oil
-1 quart dex 3
-1 quart 75-90 gear oil
-WD40
-gasket maker
-Extra water weld and steel sticks
-Rear driveshaft
-OEM re-manufactured steering rack
-Intermediate shaft
-4 inner tie rods
-Outer tie rod
-2 Koyo wheel bearing assembly
-New Denso alternator
-OEM drive belt
-Power steering pump
-Front diff axle seals
-2 ignition coils
-Spare brake line
-Fuel pump and fuel pump lock collar tool
-2 outer axle stubs in case my front diff blows (not shown)
-Winch line repair doodad
-Spare mini and maxi-fuse and relays

Aaron Kealey
Aaron Kealey
4 years ago

i dont have a winch or a aftermarket bumper yet and am curious about recovery points on the front of my 2018 4runner trd off road

Ron Booker
Ron Booker
5 years ago

I like how you mentioned that the right size winch to buy is 150% of the weight of the vehicle to get enough pulling power to get out of deep mud. My friend is looking for a good quality winch to take on his road adventures. Thank you for the tips on which winch to buy for good pulling power.

Gus Zavos
Gus Zavos
5 years ago
Reply to  Ron Booker

Thanks Ron – happy trails!

Gus
Gus
6 years ago

Hey Will!

I agree, I think it’s a good place for the shovel, I was just worried about how secure it would be up front. I’ve had it there a few times and glad to say the Quick Fists work really well. If you do set it up, just make sure the fists are tight so that the shovel doesn’t turn and rest on the grill.

have fun!!!

Will Franco
Will Franco
6 years ago

The last photo with the shovel mounted on the front of the bumper looks Awesome!!!! Is there any reason why you should not have it mounted there? Otherwise, I might do the same.

Adam nguyen
Adam nguyen
6 years ago

Amazing post. Being new to the overland community and scene I found this article great to help me get a great understanding of basic essentials for wheeling and their purpose. Great job!

Austin Vespa
Austin Vespa
6 years ago

Thanks for this! I always get the best advice on gear and mods on this site! Grabbing some recovery gear today!!

Zach
Zach
6 years ago

Love the guide, appreciate the insights and links to the items in Amazon. Nice, easy way to start filling the Wis List 😉

10
0
Questions or Comments?x
()
x